Calculate the total price of your project in 4 easy steps!
(Directions for use at bottom of page)
     Click on the kit name to see what's included in the kit... Price
(click on box to choose)
:

5.0 Mustang Donor '66 Roadster Kit description page 

$ 12,995

Stage I '66 Roadster Kit description page  

$ 7,150

Stage II '66 Roadster Kit

$ 9,895

Stage III '66 Roadster Kit

$ 14,295

Stage III Special '66 Roadster Kit

$ 19,395

Turn Key Minus '66 Roadster Kit

$ 27,495

   
     Available kit options:
(click on box to choose):
11" Brakes & rotors for front  $ 358
16" Hi Output Puller fan with mounting hardware  $ 180
"Tanks" 18 gallon polyethylene Fuel tank $ 435
9" Tubular Rear end, complete  $ 2,290
A / C Pedal Pads $ 105
"Vintage Air" Air conditioner $ 1,980
Alum. Air Vent Screens (2) $ 53
Alum. Fender liners $ 395
Alum. Footbox $ 595
Alum. Front License plate bracket $ 105
Alum. License plate bracket (no light) (rear) $ 39
Alum. Nose Piece $ 450
Alum. Oil cooler shroud $ 225
Alum. Overriders with bracket for front $ 198
Alum. Overriders with bracket for rear $ 198
Alum-a-tec Alum. Radiator $ 795
Alum. Trunk piece $ 575
Assembly guide with CD for computer $ 75
Base frame $ 2,900
Battery tray $ 16
Body & Prep work $ 1,500
Body with hood, doors, trunk $ 3,625
Body stripes $ 655
Bucket seat shells (2) $ 94
Car cover $ 75
Chrome Bumper Hoop for front $ 300
Chrome Bumper Hoop for rear $ 300
Chrome Demister Vents  for Dash  (2) $ 40
Chrome Fire Extinguisher with mounting bracket (1 lb.) $ 110
Clutch Cable & Fiberglass cover $ 175
"Carrera" Adj. Coil over shocks for front $ 495
"QA 1" Adj.. Coil over shocks for front $ 595
"QA1" Adj. Coil over shocks for rear $ 595
"Carrera" Adj. Coil over shocks for rear $ 495
Cross member for Transmission $ 45
Custom Drive Shaft $ 415
Dash , Fiberglass $ 105
Dash cover only, not installed $ 110
Dash cover & pad, installed $ 200
Dash cover & pad, not installed $ 140
Door Latch Assy $ 325
Door Latch mounting hardware $ 95
Electric Dual Fans for Radiator $ 265
Emergency Brake cables (2) $ 70
Emergency Brake Handle Assy (3 pcs) $ 105
"Faria" Gauges (6) & Sender units $ 435
Floor mats, embroidered $ 165
Front 1/4 Clip (Fiberglass) $ 1,325
Front Body  Support, Chrome $ 195
Front Body Support, Painted $ 65
Front Park Lights (Amber) (2) $ 52
Front Spring Spacers (2) $ 60
Fuel Sender Unit (for Faria Gauges) $ 28
Gas Cap , Leman's - style $ 215
Gas Filler Neck & Bent Tube $ 45
Grommet Oval Front (4) (for Front Bumper) $ 34
Grommet Round Rear (4) (for Rear Bumper) $ 26
Hardtop with no Curtains $ 1,395
Hardtop with Curtains $ 1,595
Headlight  Bucket (2) with bezels $ 295
Headers  (2), Ceramic $ 855
Headers (2), Painted $ 525
"Vintage Air" Heater / Defroster Unit $ 585
Hinge kit for Hood, Doors & Trunk $ 435
Hood Latches, original - style $ 140
Hood Prop rod with Clip $ 72
Hood Stops (rubber) $ 20
Horn $ 32
Ignition Switch $ 15
Indicator Lights (3) $ 14
Inner Panel kit (dash, trunk, footboxes, tunnel, fender liners) $ 655
Interior kit, installed $ 1,535
Interior lit, not installed $ 1,335
Latch kit for Hood, Doors & Trunk $ 655
Light Kit $ 495
Manual Rack & Pinion with rod bushing $ 235
Master cylinder only $ 72
Master cylinder with brake rod, installed $ 110
Mirror for  Drivers side  $ 83
Mirror for Rearview Side $ 83
Motor & Trans Steel mounts $ 165
Motor mounts for small block, Rubber $ 30
Motor mounts & Isolators for 428 (4) $ 225
Oil cooler with bracket no lines $ 205
Oil cooler with braided lines $ 495
Over flow tank for Radiator $ 14
Pedal Assy $ 195
Pillow block bearing $ 24
Powder coat frame & misc $ 850
Racing jacks for front $ 137
Racing jacks for rear $ 137
Radiator, 4 core brass $ 325
Radiator hose $ 11
Remote Power Brake System $ 800
Roll bar, Chrome $ 500
Roll bar, Painted $ 275
Rolling Chassis Assemblied with Mustang II Front & 8.8 Rearend $ 4,725
Rubber Pedal Pad $ 8
Seat belts, Simpson (Driver & Pass.) $ 390
Seat belts, stock (Driver & Pass.) $ 63
Seat track, adj. (1 seat) $ 66
Side Louvers (2) Painted $ 110
Side Louvers (2) Stainless $ 245
Side Pipes  (2) Ceramic $ 935
Side Pipes  (2) Painted $ 550
Side Pipes (2) Chrome $ 875
Soft top no Curtains $ 1,495
Soft top with Curtains $ 1,695
Speedo Cable $ 39
"I Did It"  Steering Column with extension, stock $ 695
Steering Rack $ 200
Steering Wheel (Mota Lita Wood & Adaptor) $ 358
Steering Wheel, stock (Grant & Adaptor) $ 87
Sway bar with bracket (rebuilt) $ 250
T - Shifter Handle with Ring & Boot $ 435
Tail lights, stock, round $ 175
Tail lights rectangular $ 115
"Team III Wheels with Knock offs Lug nuts $ 1,595
Thermostat housing $ 32
Throttle bracket $ 25
Throttle cable $ 75
Tonneau cover $ 765
Transmission mount, rubber (1) $ 21
Trunk Hinge Assy $ 150
Trunk Latch Assy $ 109
Trunk Prop Rod $ 72
Tubular Front Control Arms, Upper & Lower $ 395
Tubular Rear Trailing Arms $ 385
Upholstered Bucket Seats $ 765
Visors with hinges $ 105
Weather stripping for Hood $ 22
Weather stripping for Trunk $ 22
"Weld Racing" Wheels & Lug nuts $ 995
Windwings $ 105
Windshield Glass only with Box $ 325
Windshield Kit $ 765
Wiper Assy $ 385
"Haywire" Wiring harness $ 435
"Haywire" Pro - T Wiring harness $ 225


Add the names of your additional parts or labor, such as "engine", "paint", "wheels", etc. in the "
Your additional parts/labor" column below, as well as their price in the "Enter Price" column to the right. 

     Your additional parts/labor Enter Price  
Enter dollar amount
Enter dollar amount
Enter dollar amount
Enter dollar amount
Enter dollar amount


Directions: You can check or uncheck boxes in either of the first two sections (Steps #1 and #2), then add and/or adjust/change your own costs in Step #3, and the TOTAL will change at the bottom of the BuildSheet when you press the "TOTAL" button.

  1. Choose kit (click on box to choose).
  2. Choose the available kit options you desire (click on boxes to choose).
  3. Type in the names of your additional parts/labor (engine, paint, wheels, etc.) in the "Your additional parts/labor" box, then enter the price of each part/labor in the "Enter Price" box.
  4. Press the "TOTAL" button!
  5. Click on or off options or kits--and make changes to your additional parts/labor pricing--until you arrive at a TOTAL within your particular budget constraints!
  6. Print your BuildSheet!

Please feel free to give us a call at (417) 472-3547. We're happy to answer any questions you may have.

Last updated 24-Feb-2007
Hit Counter visitors

Home | About B&B | About our '66 Roadster | About our '34 Coupe | Kit FAQ | Owner's Group Photos | Pricing and BuildSheets | Monthly Specials | Contact
       © 2005