Calculate the total price of your project in 4 easy steps!
(Directions for use at bottom of page)

Click on the kit name to see what's included in the kit...	Price	(click on box to choose):
'34 Coupe Body Package includes body, hood, doors, trunk, dash & fiberglass inner panels	$ 4,500
'34 Coupe Fender Kit Package includes fenders with brackets, running boards with brackets	$ 995
'34 Coupe Base Frame Package	$ 3,200
'34 Coupe Rolling Chassis Package includes complete tubular front end and 9" rear end with used gears plus base frame	$ 7,300
'34 Coupe Tubular Front Suspension Package	$ 2,175
'34 Coupe 9 " Disk Brake Rearend Package	$ 2,750
Stage I '34 Coupe Kit	$ 10,995
Stage III '34 Coupe Kit	$ 19,995
Turn Key Minus '34 Coupe Kit	$ 32,995
Available kit options: Items with * are included in our stage III package		(click on box to choose):
* Master Cylinder w/ Power Brake Booster	$ 460
* Labor To Run All Brake Lines, Mount Master Cylinder	$ 450
* Power Brake Unit	$ 315
* Weld Motor Mounts & Transmission Mounts	$ 285
* Light Kits	$ 570
* Power Window Regulators w/ Side Glass	$ 685
* Power Trunk Lift Parts Only	$ 335
* Power Trunk Lift Installation	$ 100
* Electric Door Solenoid - Set of 2 (35lb) Parts Only	$ 115
* Electric Door Solenoids Installation	$ 75
* Suicide Door Safety Locks - Set of 2 Parts Only	$ 70
Suicide Door Safety Locks Installation	$ 90
Aluminum Firewall	$ 450
Stainless Steel Firewall - 1 Piece	$ 535
Aluminum Engine Compartment Walls - 2 Pieces	$ 450
Stainless Steel Engine Compartment Walls - 2 Pieces	$ 630
* Polished Stainless Steel Grille Insert	$ 450
* Bear Claw Door Latches	$ 130
* Complete Hinge Kit	$ 685
Heater & Air Conditioning Unit	$ 2,000
* Steel Fuel Tank	$ 685
* I-Did-It Steering Tilt Column, Complete (No Steering Wheel)	$ 800
I-Did-It Steering Tilt Column, CHROME UPGRADE (No Steering Wheel)	$ 200
* Front & Rear Window Glass w/ Molding	$ 450
Haywire Brand Wiring Harness	$ 550
Aluminum Hood Liner - 1 Piece	$ 335
Stainless Steel Hood Liner - 1 Piece	$ 430
Custom Drive Shaft	$ 445
* 9-inch Rearend w/ Used Gears	$ 2,700
New 3rd Member w/ Limited Slip Gears (28 Spline)	$ 1,250
* Tubular Front Assembly, Complete	$ 2,100
* Tubular Upper & Lower Front A-Arms	$ 800
Upgrade to Chrome A-Arms Set of 4	$ 400
Wiper Assembly	$ 445
* B&B Custom-Made Headlight Stands Set of 2	$ 65
Polished Hood Side Vents Set of 2	$ 450
Body Prep Work	$ 1,725
Alum-A-Tec Aluminum Radiator	$ 900
* Hood Latch Assembly	$ 200
* Manual Rack & Pinion	$ 250
Power Rack & Pinion	$ 400
Outside Door Switches Parts Only	$ 35
Outside Door Switches Installation	$ 45
Inside Door Switches Parts Only	$ 35
Inside Door Switched Installation	$ 45
Stainless Steel Hood Prop Rod	$ 50
Wood Kit for Interior	$ 265
Powder Coat Rearend and Frame	$ 975
* Faria Brand Gauges Set of 6 plus Sending Units	$ 500
Keyless Entry	$ 175
Fiberglass Overhead Console	$ 140
Fiberglass Headliner NOT INSTALLED	$ 325
16-inch Puller Fan and Bracket	$ 200
Aluminum Rear Tubs 2 Pieces	$ 450
Adjustable Coil Over Shocks for Front	$ 565
Adjustable Coil Over Shocks for Rear	$ 565
Rear window glass	$ 95
Front windshield glass	$ 95
Add the names of your additional parts or labor, such as "engine", "paint", "wheels", etc. in the "Your additional parts/labor" column below, as well as their price in the "Enter Price" column to the right.
Your additional parts/labor	Enter Price
		Enter dollar amount
		Enter dollar amount
		Enter dollar amount
		Enter dollar amount
		Enter dollar amount

Directions: You can check or uncheck boxes in either of the first two sections (Steps #1 and #2), then add and/or adjust/change your own costs in Step #3, and the TOTAL will change at the bottom of the BuildSheet when you press the "TOTAL" button.

1. Choose kit (click on box to choose).
2. Choose the available kit options you desire (click on boxes to choose).
3. Type in the names of your additional parts/labor (engine, paint, wheels, etc.) in the "Your additional parts/labor" box, then enter the price of each part/labor in the "Enter Price" box.
4. Press the "TOTAL" button!
5. Click on or off options or kits--and make changes to your additional parts/labor pricing--until you arrive at a TOTAL within your particular budget constraints!
6. Print your BuildSheet!

Please feel free to give us a call at (417) 472-3547. We're happy to answer any questions you may have.

Home | About B&B | About our '66 Roadster | About our '34 Coupe | Kit FAQ | Owner's Group Photos | Pricing and BuildSheets | Monthly Specials | Contact